DEM 6 + Sensor Tap

  • Electronically controlled mini instantaneous water heater with 5.7 kW output
  • Delivers a maximum of 50°C hot water in accordance with AS3498
  • No standby or distribution losses
  • Undersink installation
  • Hardwired single phase connection
  • Bundled with automatic sensor tap
Ask Quick Question

Product Overview

Wherever smaller volumes of warm water are frequently required, the mini electronic instantaneous water heater DEM is the perfect choice.

Product Details

This appliance delivers water at a maximum of 50°C. Point of use installation overcomes long supply lines and resulting line losses. There are also none of the common water and energy losses resulting from manual temperature adjustment. Consequently, the DEM electronic is ideally suited to washbasins, where a constant outlet temperature is preferred.

The appliance is designed for undersink applications and hardwired to the 230 V mains.

Technical Data

Model number DEM 6
Rated output (230V) 5.7kW
Rated current (230V) 24.7Amp
Phases 1/N/PE/AC 230V
Electrical Installation As per AS/NZS3000
Installation requirements AS/NZS3500.4.2 & local requirements
Switch on flow rate (minimum flow rate required to switch on the water heater) 2.2L/min
Permissible operating pressure 1000kPa
Temperature output 50°C max
IP Rating IP25
Height 143mm
Width 190mm
Depth 82mm
Weight 1.7kg
Colour white
For one/several draw off points Yes/No
Heating system Bare wire
Electronic flow rate control No
Electronic air detection system No
Programmable temperature No

Downloads

File Category Type Download
No downloads found for this product.

FAQ

Coming soon.

Ask Quick Question