Stiebel Eltron
Stiebel Eltron

You are here: home > hot water heat pumps > products > WWK 300 A Heat Pump

WWK 300 A Heat Pump


Overview

Our heat pumps harvest natures own energy, the most important features:

Manufactured in Germany with over 35 years experience
The highest efficiency rating - up to 70%*
300 Litre tank with the best delivery of hot water
Lowest power draw of all units, 2 Amps , can plug in.
Operates in lower temperatures ( down to 0 degrees)
Works indoors and outdoors
Can operate on extended off peak power and timers where availalble
Can be installed internally - only 13m3 area required                                                                                                                                Permissible Operating Pressure 500kPa                                                                                                                                                  

*Energy reduction of up to 70% when compared with a conventional electric water heater as per Government approved thermal performance simulation modelling for Zone 1

 

Call now

Applications

Information coming soon.

Frequently Asked Questions

(Q1)
Do you have an heat pump with an element?

Yes the WWK 300AH, smart element model with a 1.7kW element, this operates in the top 100lts of hot water in the tank. Why it’s smart …….it will only operate if approx 200lts of hot water is used in a very short period of time, example filling a spa bath. Being smart only engages as required this provides hot water comfort when required and energy savings

(Q2)
Can it operate of Tariff 33 in QLD or Off Peak 2 in NSW?

Yes, we encourage this tariff and this is ideal for maximum savings.

(Q3)
How can it produce hot water in the cold without an element?

The heat pump contains active defrost devices, the device can control any icing that occurs, while allowing the heat pump to produce hot water. Unlike others that use expensive electric elements for hot water generation at low temperatures…. Stiebel Eltron provides real energy savings.

(Q4)
What is the current draw?

2.3 amps on 240 Volts.

(Q5)
How noisy is it?

49dB.

(Q6)
We have the unit installed next to our bedroom window as this was the only place to install it, although it is not noisy is there any way to reduce the operation noise further?

Yes, we have available a “Sound Reduction Hood” that will reduce the sound by around 3dB. Please contact us for more information. 

Type of System Hot water heat pump
Electrical Connection 1/N/PE - 240V, 0.7kw (max)
Application Range 0°C to +42°C
Current Draw 2 Amps
Type of System Hot water heat pump
Permissible Operating Pressure 500kPa
Approvals Australian Standards Watermark AS/NZS/2712
Installation Requirements AS3500.4.2 and local authority regulations
Dimensions
Height 1875mm
Width 660mm
Weight 125kg
Weight (Filled With Water) 428kg